This engine conversion adaptor kit will allow you to fit a Suzuki Vitara or Baleno 1600 engine to yo..

Our new oil pickup adaptor bush is a custom made rubber bush designed to make life easier when swapp..

This bolt in, fully reversible 50mm / 2" body lift kit for your Suzuki Samurai, Sierra or SJ413 ..

This thermostat housing is used on the back of the head on G13B GTI and G16b Baleno engine conv..

This kit is a bolt on rear disc brake conversion for the SJ413 / Samurai, which uses SJ413 / Samurai..

This kit is designed to fit Suzuki Vitara / Escudo power steering to a Suzuki Samurai, Sierra o..

This wedge designed to fit a Suzuki Vitara / Escudo power steering box to a Suzuki Samurai or SJ413 ..

These are bolt in heavy duty replacement transfer case mounting arms to suit a Suzuki Samurai, ..

This transfer case shifter sheet bush is CNC machined from lubricated nylon for a perfect fit a..

This Transfer Case Spine is intended for the DIY'er who is reinforcing his own transfer ca..

Our driveshaft spacers are a great way to correct the spline engagement on your drive shaft aft..

This intake hose allows you to connect a Suzuki Baleno 1600 intake manifold straight to the sto..

These upgraded hub bolts are 12.9 grade and zinc plated for maximum strength and corrosion..

Suzuki axle housings are very thin and prone to bending when used hard off-road.  Our diff trus..

This tacho converter is designed to be used when doing a 1.6 engine conversion to a Suzuki Samura / ..

Protect your Samurai / SJ413 / Sierra fuel tank with one of our awesome fuel tank guards. The fue..

Protect your diff centre from dents and holes with our heavy duty diff guard designed to h..

Protect your diff centre from dents and holes with our heavy duty diff guard designed to h..

If you've already trussed your axle with our axle truss, the point where the knuckle ball joins the ..

This kit is a bolt on rear disc brake conversion for the Samurai, Sierra or SJ413 It uses standar..

Stainless steel replacement door hinge screw. Head diameter matches the orignal philips head scre..

These hub bolt cone washers suit Suzuki Samurai, Sierra, SJ413, Vitara and Escudo, along with m..

Brand new pinion spacer crush tube.   Fits: SJ413, SJ80 rear, Samurai, Sierra, Jimny rear..

Brand new nut to suit the diff pinion flange and transfer case flanges.   Fits: SJ413, SJ..

Brand new oil seal to fit the front and rear differential pinion.  Suzuki part number ..

Brand new replacement clutch cable. Fits Suzuki SJ413, Samurai, Sierra, SJ80...

Brand new replacement speedo cable. Fits Suzuki SJ410, SJ413, Samurai, Sierra, SJ80...

Brand new oil seal to fit the gearbox output where the driveshaft fits into the gearbox.  ..

This timing plug fits in the timing inspection hole in the top left hand side of the gearbox bellhou..

Brand new oil seal to fit the front axle inside the knuckle where the axle enters the diff hous..

Brand new oil seal to fit the rear axle behind the wheel bearing.   Fits: SJ410..

Brand new throttle / accelerator cable to suit Samurai, Sierra and SJ413 models. Right Hand ..

Brand new bonnet release cable to suit Samurai, Sierra and SJ413 models..

This is the bush that fits on top of the ball on the gearbox gear lever.  Often worn or degrade..

Brand new replacement lockable petrol tank fuel cap, complete with 2 keys.   Fi..

Brand new Suzuki oil pickup from the G13B 1300 engine.  Great if you are doing a G16A or G16B e..

If your gear lever is sloppy, theres a good chance your shifter bolt is worn or broken. There are..

If your gear lever is sloppy, theres a good chance your shifter bolt is worn or broken. There are..

Brand new choke cable..

A pair of new handbrake shoes for the standard transfer case mounted hand brake drum found on early ..

Brand new oil seal to fit the input and front output on the transfer case.  Suzu..

Brand new oil seal to fit the rear output on the transfer case.  Suzuki part number: 29972..

Clutch cable ajuster repair kit. Includes: Spring Barrel Washer Nut   Fits..